Range Tent-Teton Tent- Spike Tent-Pyramid Tent-Range Tent-Pyramid Tents

The Teton SpikeTent includes everything you need with only a rain fly as an option you can add - Sold Separately.

The Teton Tent is the perfect choice for spike camps and horse packers. This 4 season tent is made of 10.10 oz. per square yard Marine Treated Army Duck Canvas it is very durable, water repellent, and mildew resistant. A flame retardant version is also available.The roomy 12' x 12' floor size allows comfortable sleeping for up to four people. The roof design allows for extra headroom at the front of the tent for easy entry and more standing room inside. The front of the tent is 6'4" and rises up to 7'11" at the center. The 12x12 has additional headroom afforded by the vertical back wall. The walls are 3', making the floor space totally usable and the sewn-in floor keeps out cold wind and critters. 50 lbs

Included with the Teton:

Zippered door
Large screened window with window cover in front door
Large screened window with window cover in rear of tent
Sewn in vinyl floor
Stove pipe shield- Non-Flammable silicone coated fiberglass stove ring sewn with heat resistant thread. Includes flap. Secured with Velcro to cover hole when not in use.
Packable lightweight aluminum poles
Steel Stakes-3/8" & 12" long ea.
Ropes
Carrying bag
NOTE:
During check-out, select the "Shipping Cost Based on Weight" option; located on the Shipping & Billing page.

You will be able to see the shipping cost before completing your purchase.
Options:
Weather Pro Fly

Teton Erection Instructions for the Teton 10x10 shown for example setup. The 12x12 sets up in a similar manner.
Unfold the tent and spread it out in the desired position. Stake out the corners of the floor-firm but not tight. Put in the rest of the stakes between the corners.

Center Pole:

Assemble the pole and insert the long pin through the inside harness and grommet in the center of the roof. Push the pole up raising the tent, and place the butt of the pole in the center of the tent.

DOOR POLE:

Assemble the pole and insert the long pin through the inside harness and grommet at the top of the door. Push the pole up raising the tent, and place the butt of the pole in the center of the door end. Attach the guy rope to the metal ring on the door canopy flap and guy out the door pole with the rope and stake.

CORNER POLES:

Insert the side poles through the metal ring at each corner of the tent. Tie an overhand loop in the end of each guy rope and loop it over the pin of the corner pole. Gut out the corner with the rope and stake. You may wish the use additional side poles to hold up the side walls.